Answer: a water-heated floor collector regulates the arrival and return of hot water to the production device through several connections.
As a reminder, a heated floor is composed of one to several loops, depending on the number of rooms equipped, in which the water circulates. The hydraulic heated floor collector regulates the arrival and return of hot water to the production device, it is made up of several fittings which correspond to the different loops of the system. In the manifold, each outlet has an adjustment valve at the start to avoid the risk of overheating, and on arrival, a control valve to reduce or block the flow if necessary (cut the heating in a room unoccupied). To this is added a general valve at the start and exit to close the whole system at the same time. You can buy a pre-assembled manifold (it will suffice to make the connections), or assemble it on site. Sanding a parquet Our practical DIY videos